MeshGuard - AC/DC Wireless Alarm Bar
MeshGuard AC/DC Wireless Alarm Bar -
The MeshGuard AC/DC Wireless alarm bar provides remote notifications of hazards within a network via its integrated modem, pair of xenon strobe lights and 112dB horn. When configured as a remote device (open loop), it links wirelessly to the controller and mirrors the relay configuration of a controller. It can be configured as a host device or a stand-alone alert notification system that connects wirelessly to the remote gas monitors on the same network. The wireless alarm bar is available in two versions, powered by standard 12-28VDC input (DC version) or 110 AC (AC version).
| Input Power | Input: 110 VAC 60 HZ, 35W Max |
| Wireless |
2.4 GHz ISM-band, IEEE 802.15.4 / Mesh Radio |
| Transmission Range | 1,000 ft (300m) typical |
| IP Rating | IP-65 |
| Mechanical Interface | 1/2" NPT Male |
| Installation | 2" pipe-holding or wall mounting |
| Temperature | -4° F to 104° F (-20° C to +40° C) |
| Humidity | 0 to 95% relative humidity, non-condensing |
| Pressure | 90 to 110kPa |
| Status Indicator | 4 LEDs (Network, Alarm, Communication, Mode |
| Dimensions | 17.95" L x 18.75" W x 6.9" H (456 x 476 x 173 mm) |
| Housing Material | Aluminum |
| Weight | 26.5 lbs (12 kg) |
| Safety Compliance | Class I, Division 2 Group A,B,C,D |
| Wireless Certification |
FCC Part 15 Radio Equipment Directive 2014/53/EU (RED) (Contact RAE Systems for other countries) |
| Strobes |
Two 10 Joule xenon strobes (yellow & red) Peak Intensity: 3840,800 Cd (yellow), 62,400 Cd (red) |
| Sounder |
112dBA at 3 ft (1 m) Material: Marine-grade aluminum (Al Si12 CU) |
DC Wireless Alarm Bar Specifications
| Input Power | Input: 24 to 28VDC, 35W Max |
| Wireless |
ISM-band, IEEE 802.15.4 / Mesh Radio |
| Transmission Range | 1,000 ft (300m) typical |
| IP Rating | IP-65 |
| Mechanical Interface | 1/2" NPT Male |
| Installation | Wall mounting |
| Temperature | (-20° C to +50° C) |
| Humidity | 0 to 95% relative humidity, non-condensing |
| Pressure | 90 to 110kPa |
| Status Indicator | 4 LEDs (Network, Alarm, Communication, Mode |
| Dimensions | 17.95" L x 18.75" W x 6.9" H (456 x 476 x 173 mm) |
| Housing Material | Aluminum |
| Weight | 26.5 lbs (12 kg) |
| Safety Compliance | Ex II 2G, Ex d ia IIC T6 Gb Class I, Division 2 Group A,B,C,D |
| Wireless Certification |
FCC Part 15 Radio Equipment Directive 2014/53/EU (RED) (Contact RAE Systems for other countries) |
| Strobes |
Two 10 Joule xenon strobes (yellow & red) Peak Intensity: 19103 Cd (yellow), 3332 Cd (red) Material LM25 TF Marine-grade alloy |
| Sounder |
112dBA at 3 ft (1 m) Material: Marine-grade aluminum (Al Si12 CU) |
Features:
- Turn-key wireless alarm bar solution, mounted and pre-wired with two xenon lights and a 112dB horn
- Wireless transmission distance of 1,000 ft (300m) point-to-point. Range can be extended by using additional RAEPoint Wireless Relays
- Continuously powered by standard 12-28VDC input (DC version) or 110 AC (AC version)
